Shoe last tutorial: Trim shoe last

home > support > manual and faq > shoe last > how to trim the last

how to trim the last

When the boot last is too high and needs to be trimmed lower, we can use this function.

Time to finish: 2 minutes
Required: A 3D scan of a foot
Required: LutraCAD Shoe Last software

Step 1

Use the following steps

  • Click on the last height icon
  • If the document contains 2 lasts the software asks which side should be trimmed
  • Fill in the desired height
  • LutraCAD Last has now trimmed the last to the desired height
Trim the last

Interested in our products?

Contact LutraCAD

Privacy Policy | Copyright © 2015-2020 LutraCAD B.V.