Changelog

Version 2.4.6 (January 4, 2021)

LutraCAD Shoe Last

• Hot fix.

Version 2.4.5 (December 23, 2020)

General

• Preparation for subscriptions

LutraCAD Manager

• New feature: Possible to import USOL/UPOD directory when exported from original software
• New feature: Import order from cloud without creating client manually, but created automatically

LutraCAD Insole

• Disabled possibility to add flown elements to library
• 3D Print Solid - Elements will be merged with insole

Bug fixes and small improvements

• Topcover enabled for 3D print solid would hide insole

Version 2.4.4 (December 15, 2020)

LutraCAD Manager

• Cloud import new method: Two feet in one scan with the floor
• When RSScan scanner is used automatically close scan when Last is chosen

LutraCAD Insole

• New feature: create 3D Print Solid plantar designs in combination with custom shape/templates
• New feature: 3D Print Solid to not have a straight extrusion to plantar design, but can also be round
• New feature: to choose what to export with 3D printable insoles (left, right, both)
• New feature: directly go from to design to generating g-code
• New feature: possible to merge elements that don't flow or are already flown on top of the insole
• 3D Print Solid Flip-Flip now compatible with sinks
• 3D Print Extrusion/Heel Post dialog now compatible with smaller screens
• Hide Orthopedic Insoles from the list when they don't exist
• Orthopedic short inlay with full length extension disabled to prevent 3D Print problems
• Generating G-code now shows progress

LutraCAD Shoe Last

• After merging imprint + dorsum shoe last detection will now automatically detect scaling and orientation
• Improved: In beginner mode the feet will be positioned better

Bug fixes and small improvements

• Cloud import downloads without color
• When element is not flown on top and then convert to 3D Print Solid would rarely not generate insole
• In Shoe Last module when foot was measured and then template added template would be grouped with foot
• In Shoe Last module manually imported 3D scans now scale correctly
• Flip-Flop would rarely not join and therefore not converted to 3D Print Solid

Version 2.4.3 (November 16, 2020)

LutraCAD Insole

• Possible to turn off auto trimming scans on 50mm height
• Possible to use sinks on podiatry insoles with heel lift
• Possible to convert slipper models to 3D print solid with a straight extrusion
• Increased accuracy for elements to flow on top of insole
• Cloud import dialog now compatible with smaller screens
• When positioning 2D scans, the 2D scans will stay unlocked while using other functions
• Enabled bend on Orthopedic insoles
• Remembers current view and visible sides with heel lift
• Possible to enable bottom design for 3D print solid when starting a design with a LutraCAD template
• When FullContact preview is visible and only 1 side is visible will now hide other side

LutraCAD Shoe Last

• New solution for merging template and foot

Bug fixes and small improvements

• Smart lasso did not recognize left last when left and right exists
• Element on element flow showed dialog calculating to early
• While using BoundingBox in shoe last software objects would stay locked when undo was used in combination with a BoundingBox

Version 2.4.2 (October 7, 2020)

LutraCAD Insole

• Possible to flatten the heel when using 3D Print Extrusion
• Possible to create sub directories in library insoles
• Possible to use long and short heel lift

LutraCAD Shoe Last

• Smart lasso function added
• Display minimum token amount message when not enough tokens in account
• Disabled mirroring control points and boundingbox points

Bug fixes and small improvements

• In rare occasions element would become invalid for 3D print solid
• If disconnect license was enabled would not correctly check what type of license was used after connecting new license
• 3D print solid with sinks would rarely fail because of solid orientation of sink
• 3D print splitting the insole compatible would give wrong result sometimes with closed split curves

Version 2.4.1 (September 8, 2020)

General

• Possible to keep license connected

LutraCAD Insole

• Hide "None" in the export dialog
• Possible to mirror a skive
• Possible to not flow elements

LutraCAD Shoe Last

• Import 3D scan function now asks for rotation

Bug fixes and small improvements

• Would not put letters on insole when rw combination

Version 2.4.0 (August 19, 2020)

Rhino 5 is no longer supported. Do not update to this version or newer if you are using Rhino 5.

General

• iPad orders can be shared with other parties
• Switching license between computers simplified
• After logging in non-available licenses grayed out text

LutraCAD Insole

• Generating Full-Contact preview not repeatable or undo-able
• 3D Print heel post length adjustable
• 3D Print settings remember last used settings
• 3D Print Solid straight extrusion for flip-flip or sandals
• 3D Print Solid possible to customize edge thickness
• Small user friendly improvements
• Possible to calculate insole thickness from zero instead of lowest insole point
• Possible to switch between milling tables while positioning insoles
• Possible to copy insoles while designing milling table

Bug fixes and small improvements

• Sometimes would not create 3D print heel post, because of specific elements
• iPad imports would only set correct scaling for left scan
• Would not load files with linear dimensions
• Several small bug fixes

Version 2.3.8 (July 13, 2020)

General

• RSScan pressure plate import now enabled
• 3D scans swap left and right
• Standalone test shoe can now open existing test shoe files

LutraCAD Insole

• Heel post now possible to set different thickness for rear, mid and front
• After custom editing fullcontact contour asks to mirror new shape
• Views are not undoable and repeatable

Bug fixes and small improvements

• VLOT import now special character compatible

Version 2.3.7 (May 27, 2020)

LutraCAD Manager

• Not possible to use , (comma) when creating a new customer

LutraCAD Insole

• Possible to determine heel post angle

Bug fixes and small improvements

• Mesh repair buttons now visible again

Version 2.3.6 (May 26, 2020)

General

• Possible to import OBJ files with MTL references for colored Meshes
• Possible to import pressure plate (.apd) information
• Scaling of 3D scan from cloud and mesh repair automatically detected in CAD software
• 3D scan orientation from mesh repair to CAD software automatically detected

LutraCAD Manager

• Add 3D Scan button now also visible on smaller screens
• Scans button now also visible on smaller screens

LutraCAD Shoe Last

• Positioning foot in semi-automatic/beginnersmode improved

LutraCAD Midsole

• Grips to adjust curve are bigger
• Now locks last to prevent moving it accidentally

Bug fixes and small improvements

• Midsole solidify would not always make the right midsole solid
• Midsole import left and right would be lasts would be grouped

Version 2.3.5 (April 28, 2020)

General

• Import from iPad scanner (cloud) activated

LutraCAD Insole

• CTRL + S button now uses LutraCAD save functions
• Skive now compatible with low heel cup
• Skive default type set to Medial
• Custom measure function to dynamically draw distance

LutraCAD Shoe Last

• CTRL + S button now uses LutraCAD save functions
• Custom measure function to dynamically draw distance
• Merge template and 3D scan improved

Bug fixes and small improvements

• 3D Print splitted insole now does not export dubbel

Version 2.3.4 (April 21, 2020)

LutraCAD Manager

• Possible to create custom settings for RSScan scanners

LutraCAD Insole

• Does not reload Quickbar when doing undo/redo
• 3D Print Solid split elements checked by default
• 3D print split elements improved
• 3D print split close curve button added
• 3D print custom 3D print plantar shape

LutraCAD Shoe Last

• Automatically close BoundingBox after scaling template automatically
• Convert to button improved
• Possible to offset test shoe inwards

LutraCAD Midsole

• Live preview when designing the midsoles

Bug fixes and small improvements

• Possible to open Insole Analysis mode only once at the same time
• Hide Isolate function when 3D Print Solid has been split and no objects selected
• German last toolbar now shows correct language also in other Rhino localization's than English
• Several small bug fixes

Version 2.3.3 (February 28, 2020)

General

• MidSole: Automatically fill in the missing value (example: fill in heel thickness, ball thickness, automatically determine heel height)
• MidSole: Possible to create an edge thickness when using solidify

LutraCAD Manager

• Possible to flip and rotate 2D scans when importing images
• Message adjusted when 2D scanner is not found

LutraCAD Insole

• Possible to create heel edge thickness with 3D Print Heel Post
• Possible to create custom plantar shapes for 3D Printing

LutraCAD Shoe Last

• New convert to button
• Possible to convert to 3D print
• Possible to convert to fitting shoe
• Possible to convert to mid sole
• Heel lift now also possible on 3D scan if no lasts found in document
• When using BoundingBox it is now possible to select on top of other geometries
• When adding an element now easier to see position, because of normal/transparant view

Bug fixes and small improvements

• Smooth convert 3 quarter length insole now always correct location
• Randomly 3D print extrusion offset not correct
• Fixed bug where arrow keys did not work to move objects
• When adding element and canceling command with last design now deletes the element
• After using LutraCAD Save and Exit button does not ask for Rhino save anymore

Version 2.3.2 (February 14, 2020)

LutraCAD Manager

• Preparation for direct import from cloud

LutraCAD Insole

• Heel post function improved

Bug fixes and small improvements

• Sending a file via e-mail would give error
• Multiple small bug fixes

Version 2.3.1 (January 23, 2020)

LutraCAD Manager

• Possible to purchase tokens directly from the LutraCAD Manager

LutraCAD Insole

• Possible to merge elements instead of flow them
• Possible to give 3D print extrusion an edge thickness

Bug fixes and small improvements

• Order system does not show drop down menus
• Minor bug fixes

Version 2.3.0 (January 14, 2020)

LutraCAD Manager

• Possible to clean up and repair 3D scans

LutraCAD Insole

• Possible to have different sizes for left and right insoles
• Possible to measure height on specific points
• Possible to create a cross section of the insoles
• Possible to isolate selected objects (hide all other objects)

Bug fixes and small improvements

• Small bug fixes

Version 2.2.10 (December 12, 2019)

General

• Now possible to set a cool down timer when scanning

LutraCAD Manager

• 3D print solid now checks if skin is thicker than 0.5 mm to prevent holes in print
• 3D print text mirrored after Rhino update
• 3D print possible to automatically split elements with 3D print solid
• Now remembers the correct element height after flowing

LutraCAD Shoe Last

• Now possible to measure 3D scans
• Merging template and foot improved
• Possible to export midsoles

Bug fixes and small improvements

• With pay-per-design 2D scans not visible in transparant mode
• Beginners mode template import custom library location not correct location
• Library add low last or template would be added wrong if basis was right last or template
• MM size table would not load correctly

Version 2.2.9 (October 1, 2019)

LutraCAD Shoe Last

• Improved scale basic profile/template to 3D scan
• Now possible to export lasts watertight
• Now possible to export mid soles with pay-per-design

LutraCAD Insole

• Undo flow element button
• Now possible to create multiple milling tables

Bug fixes and small improvements

• Would not show bounding box icon when designing new insole template

Version 2.2.8 (September 19, 2019)

General

• Now possible to make notes per design
• Now possible if only manager available to create empty files to make notes
• Now possible to move the complete library to a different location

LutraCAD Insole

• Now remembers if LutraCAD elements need to be shown
• Now possible to use full contact with scan of 1 side

Bug fixes and small improvements

• Merging 3D scan and template for last improved
• If complete license and designing a last would sometimes show insole Quickbar
• Would show podiatry elements when orthopedic insole is used

Version 2.2.7 (September 3, 2019)

General

• LutraCAD 3D preview lightning adjusted to be able to view 360 degrees of 3D scan

LutraCAD Manager

• Possible to delete existing milling table

LutraCAD Insole

• PDF export scaling now working with Windows Display Scaling Settings
• Improved automatically positioning for 3D scans
• More accurate insole height detection
• Possible to activate Clipping Plane from any view
• Possible to set shoe size by mm
• Customize manual now compatible with sinks
• Right mouse click on top view will show bottom view
• Height lines also visible in front and rear view
• 3D scan dimension detection

Bug fixes and small improvements

• Would not import sink if the name contains a space
• Font size would randomly increase
• When setting Rhino for first time would sometimes not load Rhino settings
• Customize manual on right insole would sometimes focus on left insole

Version 2.2.6 (August 20, 2019)

General

• New language added, Simplified Chinese
• LutraCAD now remembers if design is insole or last
• No need to choose which Rhino to use when only 1 version available when booting for first time
• Language adjustments
• 2D scans visible from side view
• Milling table module

LutraCAD Insole

• Flip-Flip transform also compatible with podiatrist-insoles
• When automatically determining insole height never go above 35 mm

Bug fixes and small improvements

• When 2D scans are made or imported in combination with small screen resolution would not show whole image

Version 2.2.5 (July 25, 2019)

General

• .lutra files now save mesh geometry (3D scans)
• Order system now multi-language

LutraCAD Manager

• Possible to rename files
• After scan or import 1 image you can now rotate the image

LutraCAD Insole

• Convert to flip-flop
• When filling in a shoe size with fullcontact insoles LutraCAD now gives a suggested shoe size
• Possible to make a milling table Z-Axis correction to calibrate insole thickness

LutraCAD Shoe Last

• When in beginnersmode for last design will now zoom extends with the 3D scan
• When in beginnersmode for last design and reposition locations will now hide the 2D scans
• Always draw smooth tool's smooth area in front of last
• Automatically hide and show beginnersmode when focus of Rhino is lost and gained

Bug fixes and small improvements

• When using heel rise and elements were not flown yet would also put elements on heel rise which could give problems
• When a 2D scan was made and cancelled pressed could not immediately scan again, but needed to close pop-up first and re-open

Version 2.2.4 (June 25, 2019)

General

• Added extra dialog's to make actions more clear
• USOL 3D Scanner now compatible
• When double clicking .lutra file and pressing export now exports with opened file name

LutraCAD Insole

• When adding a new shape/pattern will now automatically close the boundingbox when accepting
• Heel lift: not possible to put letters in the dialog
• Create sink: now always ends in transparant mode

LutraCAD Shoe Last

• Import 3D scans added in LutraCAD Menu-Bar
• With pay-per-design now saves measurement curves

Bug fixes and small improvements

• Insole height: when pressing cancel would remove red contour
• Insole height: when pressing cancel and there was already a preview, show this preview again
• Insole height: force show 3D scans
• When already generated a preview and starting over a new insole now resets red preview
• When starting a fullcontact insole and using analysis now hides fullcontact template
• When scanning with a 2D scanner would give error when starting a new design
• When pay-per-design is on, would not load own created shape/pattern

Version 2.2.3 (June 11, 2019)

LutraCAD Insole

• MoveUVN for Smoothing not working
• Not possible to move insoles around to prevent problems
• Selected objects now red so selected points are more visible
• To continue buttons now red

LutraCAD Shoe Last

• MoveUVN for Smoothing not working
• Selected objects now red so selected points are more visible

Bug fixes

• Add 2D scan for template/shape in insole software would not show commands
• When creating template/shape now shows correct commands
• Would not load open meshes in the last software
• Small text improvements
• After replacing 3D scan in insole software would show fullcontact template

Version 2.2.2 (June 4, 2019)

LutraCAD Manager

• While scanning with RSScan iQube or Tiger will show loading screens and extra checks for connecting correctly
• Loading client files performance increased
• Delete client, files and scans can now be done by using the context menu
• Open mail client and automatically add selected designs as attachments

LutraCAD Insole

• 3D Print split now tells if a curve is not usable (self intersecting curves)
• PointsOn will now be shown when selecting a curve
• 3D Print always exports in separate files
• Possible to export as 3DM for Rhinoceros 5
• Possible to put a logo on the bottom of 3D printable insoles
• Possible to export the contour of the insoles in DXF format
• Loading screen when flowing elements
• Loading screen when exporting files
• Delete button added (bin)

LutraCAD Shoe Last

• Possible to turn measurements off or on like ball, lower waist, higher waist, heel circumference
• Possible to export as 3DM for Rhinoceros 5
• Mirror right side image

Bug fixes

• Would not lock 2D scans after accept
• Update available pop-up behind other dialog
• 3D print split now works again with closed curve
• 3D print heel block text now always just in front of heel block
• If side image is visible in Last software and taking measurements, side images stand in the way
• Remove cast would sometimes go wrong direction
• Fixed missing translation in last design beginners mode
• Manager main tabs not rendered correctly when using Client mode
• Manager file duplication can now be cancelled
• When licence does not contain any design products, don't try to open
• When pay-per-design active could not create custom shapes/templates in insole software

Version 2.2.1 (April 16, 2019)

LutraCAD Manager

• Possible to open .lutra files directly by double clicking them from explorer
• Refresh order tab when clicked
• Place order text replaced with Current orders

LutraCAD Insole

• Refresh Quickbar after undo/redo
• Will not generate insole thickness if set to 0
• Possible to delete 3D Print Split Curve from library

Bug fixes

• 3D print split multiple bug fixes

Version 2.2.0 (April 8, 2019)

LutraCAD Manager

• Make copy of existing design
• Automatically adjust toolbars when order system is active

LutraCAD Insole

• 3D Printable insoles can also be ordered now
• 3D Print and 3D Print Split now visible in Quickbar
• 3D Print Split add curve and split 1 workflow
• Possible to create 3D Print Split curve library
• Different places now tells it's about mm
• Calculating pop-up when generating 3D printable insoles
• Possible to turn control points on when selected a 3D scan to delete noise
• Possible to hide LutraCAD elements
• Possible to show podiatry elements for fullcontact insoles
• MoveUVN to smooth insole added in menu bar

Bug fixes

• No buttons when creating an Insole Library Template/Shape
• Pay per design could open 3DM files, but could not save
• Beginnersmode automatically taper would go wrong if toes do not stick out at the top
• When insole floats in the air insole thickness not correct for milling
• Minimum 3D print extrusion/heel block thickness is now 0.5mm
• When no fullcontact preview is generated, but accept button is pressed will automatically accept insole
• Quickbar buttons would disappear when all points selected if boundingbox active
• Topview zoom out little further so Quickbar never in front
• When boundingbox active and flow/trim elements is pressed would get wrong result

Version 2.1.1 (March 14, 2019)

LutraCAD Manager

• Upgraded to x64

Bug fixes

• If buttons are used from Quickbar Rhinocers loses focus and you can't use arrow keys, delete and enter key
• After 3D Print Split will show basic functions in Quickbar
• 3D Print Heel Block (Polypropyleen insole) was broken
• Quickbar in front of 3D Print dialogs

Version 2.1.0 (March 5, 2019)

LutraCAD Manager

• Possible to open Clipboard.dat file with client information to automatically create or load client

LutraCAD Insole

• Possible to export as 3DM files
• Position 2D scan pop-up smaller and centered
• Quickbar now hides when Rhinoceros not on top
• 3D Print Split now works with closed curves

LutraCAD Last

• Possible to export as 3DM files
• Position 2D scan pop-up smaller and centered
• After merging foot scan and template would cut of part of nose model

Bug fixes

• Library - complete insoles was broken
• Empty fields found orthopedic/podiatric insole pop-up now in foreground
• Tokens left message was always Dutch
• Logo when custom skin active and selecting file was still LutraCAD logo
• Would not completely close BoundingBox with ESC key
• 2D Scan result not always top most => now hides all other dialogs
• In milling tab hide all *bak files
• When exporting insoles and cancelling at a dialog insole thickness would not be deleted
• Quickbar hide submenu when hovering over button without submenu
• Quickbar hide when selecting points on 3D scan
• 3D Print Split would not export separate parts
• 3D Print Solid would rarely self-intersect
• 3D Print Solid would not generate if insole thickness thinner than 1 mm

Version 2.0.0 (February 5, 2019)

Read more about the update

LutraCAD General

• Rhinoceros 5 developments stop and only Rhinoceros 6 plugins will get new features and bug fixes
• Pay per use option added
• On different locations now shows value is in mm

LutraCAD Manager

• Improved user experience
• Visual update
• Import: Scan dialog now clear what the buttons do
• Import: When scanner is not available, gray out the options
• Print: When current default printer is not available, select a new default printer
• Order: Error messages now in LutraCAD style and multi language
• Import: If no 3D scanner has been configured a message will be shown when 3D scan button has been used
• Config: Red button for save
• Client information less information
• Client notes moved to client information

LutraCAD Insole

• Personalize what should be shown on the order form (PDF export)
• Orthopedic insole, checkbox to add front foot extension will only be show when usable
• Rotating 2D scan will show pop-up to lock again instead of extra step
• 3D Print splitted parts will also export as separate files
• 3D Print Solid possible to enable/disable creating edge thickness
• 3D Print Heel Block / Polypropylene Insole heel block offset can be adjusted and taper angle
• Buttons/Commands will be shown when object is selected
• Possible to use LutraCAD Quickbar, Side toolbars or combination
• Show an insole thickness with podiatry insole/la vigne method in side view
• Now shows message when function can not yet be used and which step you should complete first
• Fullcontact-insole => change height and add sink will fill in text box automatically with current height
• US Size table added

LutraCAD Last

• Improved speed of converting scan to Rhino object
• Export now tells if export is successful
• Export will asks if it needs to open export directory
• Rotating 2D scan will show pop-up instead of right clicking the step again

Bug fixes

• Edit insole shape custom would hide podiatry shape (yellow shape/pattern)
• If Rhino5 has been uninstalled. And you start LutraCAD with Rino5 and exception would occur
• Importing a new 2D scan and cancelling the dialog will give an exception
• Order: Dialog when a file is added to the order list now shows correct language
• When database locations change LutraCAD will now restart to prevent confusion
• Toolbars now work with Windows multi user login
• Would show available licenses of old version
• Would not select client when client information was changed

Version 1.4.6 (December 4, 2018)

LutraCAD Cloud

• TestShoe module now touch friendly

LutraCAD Manager

• Possible to import PDF images with both feet as 1 image
• Compare 2D scans/images

LutraCAD Insole

• 3D print solid improved

LutraCAD Last

• Dutch toolbar added
• Scale basic profile will not automatically scale both sides, but asks which side to scale if both sides have templates
• Functions to add templates or low lasts to library
• Possible to show/hide 2D scans
• FoamBox 3D scans and foot 3D scans are separate objects
• Merge 3D scan with last improved
• Possible to measure foot/cast 3D scans

Bug fixes

• 3D-Print heel block not working correctly in other Rhinoceros languages than English
• Close BoundingBox and ControlPoints when pressing export
• Italian LutraCAD Insole version would not load elements
• On some computers would show NullReference when opening Rhinoceros
• LutraCAD popup now shows immediately after opening a file, instead of thinking LutraCAD is stuck

Version 1.4.5 (October 15, 2018)

LutraCAD

• French and Italian languages added

LutraCAD Last

• Design the basis of a lasts by dragging bars and clicking on buttons
• Custom skin also added for last software
• If available, will now show example of low last and templates

Bug fixes

• If no last was selected before opening boundingbox, would not update leg measurements
• When opening Rhinoceros for last software, Rhinoceros would not come to the foreground
• When converting the insole to 3D print solid insoles would rarely disappear
• Automatically flatten front foot with fullcontact-insoles was broken
• When clicking 3 points for fullcontact-insoles, preview dots not always visible

Version 1.4.4 (September 25, 2018)

LutraCAD

• Rhino 6 uses scheme so default Rhino and LutraCAD are seperated

LutraCAD Insole

• If a 3D scan is a closed mesh software will ask user to split scan by drawing a line

LutraCAD Last

• If images for side view are used will now not become transparent
• Separate toolbar for low lasts

Bug fixes

• If taper cast is used in last software and an object is selected, the object was deleted
• Would not add text on 3D print insole in other Rhinoceros language than English
• Element trim would rarely keep the wrong part
• Last smooth function would not draw smoothed area in Rhinoceros 6

Version 1.4.3 (September 6, 2018)

LutraCAD

• New module testshoe

LutraCAD Insole

• Possible to export as STEP file

LutraCAD Last

• New toolbar icons

Bug fixes

• Move heel circumference line last software not working
• Software would crash if , or . was used on leg circumference height
• 3D print functions will now merge elements correctly
• In rare occasions would not merge 3D scan with template
• Would not convert insole to 3D print if only 1 fullcontact insole was designed
• If Rhinoceros would be in other language as English would show wrong tooltip

Version 1.4.2 (August 13, 2018)

LutraCAD Manager

• RSScan scans now saved binary and filesize a lot smaller, also the preview is faster
• Account not activated message updated
• When Rhinoceros is out of date Manager will tell current and required version

LutraCAD Insole

• When converting the insole to 3D printable object the file will be saved as a new file
• 3D print text now multi-line possible

LutraCAD Last

• Now possible to determine measure position more accurate
• Smooth/Pull possible to undo last drag
• Import 3D scan separately
• Make last fullcontact with 3D scan

Bug fixes

• Fullcontact insole would become smaller when smooth was used
• Merging template with 3D scan would sometimes fail
• Cutting last for midsole would fail if object is invalid

Version 1.4.1 (July 26, 2018)

LutraCAD Insole

• 3D Print solid insole thickness was not always correct
• Export insole thickness height automatically filled in with default thickness

LutraCAD Last

• Possible to save leg circumference heights

Bug fixes

• 3D Print functions will not show SaveAs dialog
• 3D Print export will not show insole thickness dialog
• Rhino 6 panel text fell outside of panel
• Customize manual was broken

Version 1.4.0 (July 9, 2018)

General

• LutraCAD is now available for Rhinoceros 6

LutraCAD Manager

• Search function in milling files
• CommandLine installation
• CommandLine configuration
• CommandLine log-out
• Possible to change Rhinoceros
• Choose what you want to scan with RSScan scanners (last/foot/foambox)

LutraCAD Insole

• Flown elements can't be edited
• Insole thickness determined at export
• Turn off object lock when boundingbox is active

LutraCAD Last

• Possible to enable import of 2D side scans
• Turn off object lock when boundingbox is active
• Automatically rebuild last after merging

Bug fixes

• Crash when Rhinoceros not installed in default location
• 3D Print Occasionally would not merge sink/dent
• 2D Scaling setting in manager would not accept decimals
• Fixed multiple bugs when designing midsole

Version 1.3.14 (June 5, 2018)

General

• When opening a file will bring last opened file to front
• New update available dialog
• LutraCAD will check if your Rhinoceros version is compatible with LutraCAD

LutraCAD Last

• Possible to increase last/cast height
• Recalculate circumference leg measurement lines after increasing/decreasing last/cast height

Version 1.3.13 (May 15, 2018)

LutraCAD

• WRL files are now compatible
• RSScan pressure plates now work with LutraCAD via RSScan Agent
• Sometimes minimized Rhinoceros 5 when saved manual
• When exporting milling speed dialog will not show when not generating PDF and not generating milling file

LutraCAD Insole

• Current heel rise with 3/4th length insole was incorrect
• 3D print now generates a lot faster
• 3D Print now possible to add custom text on bottom
• 3D Print solid insole thickness now customizable

LutraCAD Last

• Leg measurements now multiple heights possible and auto update
• Now also detects heel rise of casts
• Measuring lasts updated

LutraCAD Supplement

• Software remembered 5 points clicked from previous lasts when generating supplements
• Will now group supplement top and bottom automatically
• When feed-rates or mills adjusted refill drop-down menus

Version 1.3.12 (April 12, 2018)

LutraCAD

• Background will not be deleted when Importing blueprints/pressureplate images
• When importing a 3D file. Colors will be removed
• Possible to turn on TWAIN dialog when scanning 2D

LutraCAD Last

• Last software will now load correct customer
• Option to remove the thickness of the cast
• Smooth function bug fix
• Possible to measure leg circumference at given height
• Possible to also cut off cast at given height instead of only last
• When cast or last has been cut off ShrinkTrimmedSrf to prevent problems in later stage

Version 1.3.11 (January 30, 2018)

LutraCAD

• Adding new elements with no name now possible
• Rhinoceros 5 starts when LutraCAD starts, now scans are opened in up to 500% faster

LutraCAD Last

• Last software now compatible with other Rhinoceros 5 languages than English
• Last toolbars work in other Rhinoceros 5 languages
• Last software is now able to process open 3D scans better

Bug fixes

• importing 3D scans with Orthopedic insole did not work properly

Version 1.3.10 (December 19, 2017)

LutraCAD Insole

• 3/4th length insole button added under "Export" button
• Convert to positive button can now be found under "Export" button
• 2 3D print functions added and can be found under the "Export" button and convert the insole to 3D printable objects

LutraCAD Last

• Now possible to add elements and merge them with the last

Bug fixes

• When clicked on scan, in the manager, multiple times before scanner starts, would get Source Error
• Merging template with 3D scan of foot would not merge sometimes
• Would sometimes automatically log out

Version 1.3.9 (December 5, 2017)

Adjustments

• PDF export hides empty fields

Bugfixes

• Software does not crash after name change when client search has been used
• If backspace was used to change object height in right panel Rhinoceros 5 would crash

New - Last software

• Smooth function did sometimes not work at the nose
• Smooth function would crash Rhinoceros 5 sometimes
• Nose does not scale anymore with auto scale function
• Sometimes did not merge template with scan

Version 1.3.8 (September 26, 2017)

New

• Adjust heel width

Adjustments

• Name of client will be printed at the bottom left when printing 2D scans

Version 1.3.7 (September 3, 2017)

New

• Now possible to directly control ZSMMaatwerk 3D scanner
• Custom fields in PDF
• When BoundingBox active not possible to select anything else than grips
• When ESC-key pressed BoundingBox will close
• Automatically position 3D scan

Adjustments

• Message when no license available
• Message when setting custom skin
• Message when not right .NET framework installed
• Message when starting FullContact insole and no 3D scans available
• Message when generating FullContact insole
• Message after export complete with link to export directory
• Message when trying to connect to 3D scanner
• When Import 3D scan is set to manual, always ask if bottom is visible
• Selected points visible when importing 3D scans
• Insoles start on Y=0 instead of Y=10 to length confusion

Bugfixes

• Fixed error when trying to update skin when no internet available
• Fixed when new update installed update skin toolbar skins
• Fixed error when invalid RSScan private key is used
• Fixed several text issues
• Delete file when 0 objects are in file when closing
• Pronation/Supination detection correct now

Version 1.3.6 (July 31, 2017)

New

• Possible to change import dimension scaling for 3D scans
• When exporting as STL possible to export left and right separate
• Custom skin possible on request
• Possible to flow element/sink on other element

Adjustments

• Generating 3D Fullcontact-insole speed increased
• PDF export

Version 1.3.5 (June 27, 2017)

New

• When first time using FullContact insole, LutraCAD will ask if bottom of foot is visible
• Customize template manually
• Direct 3D scan with RSScan 3D scanner

Adjustments

• Faster loading 3D examples
• Negative flip / 3D print functions check if all elements are flown

Bugfixes

• Some text in buttons on wrong position
• Positive molds now works with dents/sinks
• OBJ files example visible
• Several small bug fixes

Version 1.3.4 (May 24, 2017)

New

• Scanner contrast adjustable in 6 different steps
• Possible to scan blueprints in 2 times, adjustable in settings > Import
• Functions to easily adjust width and length of insole, can be found under Edit Size
• 2 New 3D print functions for Solid and Heel block

Adjustments

• When opening existing file, will not ask for new 2D scan selection
• Will open Rhinoceros 5 maximized
• After logout back to login screen
• Text corrections
• At Fullcontact insole Step 4: Insole height will automatically fill in left height at right foot
• When adjusting shoe size automatically fill in current size
• When clicking Fullcontact insole and no 3D scans available for this client then software will not continue it's functions, but will show a message/warning
• LutraCAD will not always restart when settings are adjusted. Only when necessary

Bugfixes

• Login screen is now full screen
• Will not give message "LutraCAD is already open" when trying to find database location again
• No error when Show Mesh is pressed if only left or right is visible and scans already visible

Version 1.3.2 (April 20, 2017)

Plugin

• When log in change LutraCAD 2D and 3D to LutraCAD Basic and Premium
• Possible to take a monthly license
• Round object height on 1 decimal
• Possible to turn off images in PDF export
• Added cover materials in PDF

Bugfixes

• Use selected printer in settings while calibrating printer
• Error while importing some OBJ files. Importing possible, preview not always
• Save printer/scanner settings in LutraCAD directory to keep settings when updating
• Sometimes when generating FullContact Insole not right result
• Client(ext) did not show right 2D and 3D scans
• Flow selected elements also trims insole for dents
• Object height change extreme big when comma used instead of dot
• Pronations/Supination elements do not rotate

Version 1.3.1 (April 11, 2017)

Manager

• Keep settings of previous version when installing update
• When first time start-up automatically detect how LutraCAD will be used
• If design license is selected, detect if Rhinoceros 5 is installed. If not tell user to install Rhinoceros 5
• LutraCAD usable for smaller screens. Minimum screen size is now: 1280x720
• When using order system, possible to choose LutraCAD mail settings as sender

Plugin

• Possible to use Rhinoceros 5 in all languages. Before only possible in English
• Rebuild of NegativeFlip command (convert to positive mold)
• If export location is not found. LutraCAD will not automatically reset this setting to default location

Bugfixes Manager

• After adding 3D files to client directly select/show them
• In settings textbox for distance between blocks visible
• When logging in, error message when closing LutraCAD
• Log in time shorter. When logging in less times connecting to server.

Bugfixes Plugin

• When adding 2D scans, automatically relocate them to center of insoles
• When adjusting shoe size elements did not scale right